doc. no : qw0905-lurf 9033/tr1 rev. : a date : 01 - apr. - 2009 surface mount tape and reel ligitek electronics co.,ltd. property of ligitek only lurf9033/tr1 data sheet lead-free parts pb l dcc
0.5 ? 0.1 2.0 0.4 ? 0.1 r 1.9 2.0 4.0 4.0 1.5 1.4 0.4 0.7 9.3 0.16 2.8 4.85 120.3 5.5 1.75 3.32 4.6 ? 0.5 2.5 cathode part no. lurf9033/tr1 note : the tolerances unless mentioned is ? 0.2mm,angle ? 0.5. unit=mm. note : 1.all dimension are in millimeter tolerance is ? 0.2mm unless otherwise noted. 2.specifications are subject to change without notice. polarity carrier type dimensions package dimensions 1/7 page ligitek electronics co.,ltd. property of ligitek only 0.3 2.16
2/7 74.0 ? 1.5 r 178 ? 2.0 14.2 ? 1.0 16.0 ? 1.0 ligitek electronics co.,ltd. property of ligitek only page reel dimensions 1500 devices quantity/reel 12.0mm tape,7"reel description lurf9033/tr1 part no. part no. lurf9033/tr1
electrostatic discharge(*) esd 2000 v min. 900 luminous intensity @20ma(mcd) color water clear note : 1.the forward voltage data did not including ? 0.1v testing tolerance. 2. the luminous intensity data did not including ? 15% testing tolerance. lurf9033/tr1 part no emitted algainp red material dominant wave length f dnm lens 630 max. min. 1.5 20 2.4 forward voltage @20 ma(v) spectral halfwidth ??f nm typical electrical & optical characteristics (ta=25 j ) storage temperature operating temperature tstg t opr -40 ~ +100 -40 ~ +85 typ. 20 1500 viewing angle 2 c 1/2 (deg) j j ligitek electronics co.,ltd. property of ligitek only absolute maximum ratings at ta=25 j reverse current @5v power dissipation peak forward current duty 1/10@10khz forward current parameter ir pd i fp i f 10 120 130 50 symbol ratings urf g a mw ma ma unit page 3/7 part no. : lurf9033/tr1 static electricity or power surge will damage the led. use of a c onductive wrist band or anti-electrosatic glove is recommended when handing these led. all devices, equipment and machinery must be properly grounded. *
relative intensity@20ma 600 wavelength (nm) 550 0 700 650 0.5 0.5 relative intensity@20ma normalize@25 j forward voltage@20ma normalize @25 j 20 ambient temperature( j ) fig.5 relative intensity vs. wavelength 1.0 ambient temperature( j ) 0.8 -0 -20 -40 60 40 20 80 100 0 -40 -20 -0 60 40 80 100 fig.4 relative intensity vs. temperature 2.5 1.0 0.9 1.1 1.5 1.0 2.0 fig.3 forward voltage vs. temperature 1.2 3.0 100 relative intensity normalize @20ma forward current(ma) forward current(ma) forward voltage(v) 1.5 1.0 0.1 2.5 2.0 3.0 1.0 10 0 1.0 10 0.5 1.0 1.5 2.0 100 1000 fig.2 relative intensity vs. forward current fig.1 forward current vs. forward voltage 1000 3.5 2.5 typical electro-optical characteristics curve ligitek electronics co.,ltd. property of ligitek only 3.0 urf chip 4/7 page part no. lurf9033/tr1 50% 75% 50% 0 25% 25% 75% 100% fig.6 directive radiation -30 x 30 x 60 x 0 x -60 x 100%
lurf9033/tr1 part no. soldering heat max. 260 j 5sec 120 ~ 150 j 120 ~ 180 sec 60 ~ 120 sec note: 1.wave solder and reflow soldering should not be made more than one time. 2.you can just only select one of the soldering conditions as above. page 5/7 recommended soldering conditions ligitek electronics co.,ltd. property of ligitek only 245 ? 5 j within 5 sec 2. wave solder preheat 1. hand solder basic spec is ?? 280 j 3 sec one time only. 3. lead reflow solder temp. ( j ) rising +5 j /sec preheat 120 150 240 cooling -5 j /sec time 260xc max. 10sec.max 1~5xc/sec 1~5xc/sec preheat 180~200xc 4. pb-free reflow solder above 220xc 60 sec.max. 120 sec.max.
lurf9033/tr1 part no. 6/7 page ligitek electronics co.,ltd. property of ligitek only circuit model b precautions for use: storage time: 1.the operation of temperatures and rh are : 5 j ~35 j ,rh<60%. 2.once the package is opened, the products s hould be used within a week. otherwise, they should be kept in a damp proof box with descanting agent. considering the tape life, we suggest our customers to use our pr oducts within a year(from production date). 3.if opened more than one week in an atmos phere 5 j ~ 35 j ,rh<60%, they should be treated at 60 j? 5 j fo r 15hrs. drive method: led is a current operated device, and therefore, require r some kind of current limiting incorporated into the driver circuit. this current limiting typically takes the form of a current limiting resistor placed in series with the led. consider worst case voltage variations than could occur across the current limiting resistor. the forwrd current should not be allowed to c hange by more than 40 % of its desired value. circuit model a led led esd(electrostatic discharge): static electricity or power surge will damage the led. use of a c onductive wrist band or anti-electrosatic glove is recommended when handing these led. all devices, equipment and machinery must be properly grounded. (a) recommended circuit. (b) the difference of brightness between led could be f ound due to the vf-if characteristics of led. cleaning: use alcohol-based cleaning solvents such as isopropyl alc ohol to clean the led.
lurf9033/tr1 part no. 7/7 reference standard test condition test item reliability test: classification 1.ta=105 j ? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) 1.ta=-40 j ? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) 1.ta=65 j ? 5 j 2.rh=90 %~95% 3.t=1000hrs ? 2hrs 1.ta=105 j? 5 j &-40 j? 5 j (10min) (10min) 2.total 10 cycles operating life test low temperature storage test high temperature storage test endurance test high temperature high humidity storage test thermal shock test 1.ta=under room temperature as per data sheet maximum rating. 2.if=20ma 3.t=1000 hrs (-24hrs, + 72hrs) ligitek electronics co.,ltd. property of ligitek only page mil-std-883d:1008 jis c 7021: b-10 mil-std-750d: 1026 mil-std-883d: 1005 jis c 7021: b-1 mil-std-202f:103b jis c 7021: b-11 jis c 7021: b-12 mil-std-202f: 107d mil-std-750d: 1051 mil-std-883d: 1011 1.t=260xc max. 10sec.max. 2. 6 min 1.105 j ~ 25 j ~ - 55 j ~ 25 j 30mins 5mins 30mins 5mins 2.10 cyeles temperature cycling ir reflow environmental test mil-std-202f: 107d mil-std-750d: 1051 mil-std-883d: 1010 jis c 7021: a-4 mil-std-750d:2031.2 j-std-020 mil-std-202f: 208d mil-std-750d: 2026 mil-std-883d: 2003 iec 68 part 2-20 jis c 7021: a-2 solderability test 1.t.sol=235 j? 5 j 2.immersion time 2 ? 0.5sec 3.coverage ? 95% of the dipped surface
|
